When your iPhone screen is frozen, the reset you want is a force restart: press and quickly release volume up, press and quickly release volume down, then press and hold the side button until the Apple logo appears. It doesn’t erase your photos, messages or apps, and it works on every iPhone that runs iOS 27. Older models that can’t run iOS 27 use different buttons, covered in their own section below.
If the force restart doesn’t bring the screen back, the fixes after it go in order: charge the phone, then update iOS from a computer in recovery mode, and only then consider a restore that erases the phone.
Before you start: which kind of reset you need
“Reset” gets used for three very different things, and only one of them is safe to try first.
- Restart: turning the phone off with the power-off slider and back on. This needs a working touchscreen, so it won’t help when the screen ignores your taps.
- Force restart (also called a hard reset or hard restart): a button sequence that makes the iPhone shut down and start up even when the screen is stuck. Your content and settings stay put.
- Restore or erase: wiping the iPhone and reinstalling iOS. This is a last resort for a phone that still won’t work after everything else, and it deletes anything that isn’t in a backup.
You don’t need a computer, a charger or your passcode for a force restart. You will need your passcode afterward, because an iPhone always asks for it (instead of Face ID or Touch ID) the first time you unlock it after a restart.
Force restart a frozen iPhone on iOS 27
These steps apply to every iPhone that can run iOS 27: iPhone 11 and later, plus iPhone SE (2nd and 3rd generation). Apple lists the full set on its iOS 27 compatible models page.
- Press and quickly release the volume up button. Tap it; don’t hold it. On iPhone Duo, use the volume button closest to the side button.
- Press and quickly release the volume down button. On iPhone Duo, that’s the other volume button.
- Press and hold the side button (the single button on the opposite edge from the volume buttons; on iPhone SE it’s on the right side). Keep holding. If the power-off slider shows up, ignore it and don’t let go.

- Release the side button when the Apple logo appears. The screen usually goes black first, and Apple notes the logo can take longer than 10 seconds to show.
- Wait for the Lock Screen, then enter your passcode.
Apple’s own instructions are on its Force restart iPhone page. If you want the button layout explained model by model, with pictures of where each button sits, see how to force restart an iPhone.
The most common reason this fails is timing. The two volume presses should be quick taps, one right after the other, and then the side button press should start straight away. If you see the screenshot flash or the volume changes, you held a volume button too long. Start again from step 1.
Older iPhones that can’t run iOS 27
If your phone is older than an iPhone 11 (other than the iPhone SE 2nd and 3rd generation), it is on an earlier version of iOS, and the buttons depend on the model. Pick the one block that matches your phone.
iPhone 8 and iPhone X family
Use the same three-step sequence as above: quick press of volume up, quick press of volume down, then hold the side button until the Apple logo appears.
iPhone 7 and iPhone 7 Plus
- Press and hold the side button and the volume down button at the same time.
- Keep holding both until the Apple logo appears, which can take longer than 10 seconds, then let go.
iPhone 6s and earlier, including iPhone SE (1st generation)
- Press and hold the Home button and the side or top button at the same time.
- Release both when the Apple logo appears, usually after about 10 seconds.
Apple keeps these older combinations on its If your iPhone won’t turn on or is frozen article, under the Home button tab.
When only part of the iPhone is stuck
A force restart is the right tool for a screen that doesn’t react at all. If some things still respond, there are gentler options.

- One app is frozen, the rest of the phone works. Open the App Switcher (swipe up from the bottom edge and pause, or double-click the Home button on iPhone SE), swipe to the stuck app, and swipe it up to quit it. Then open it again. Apple describes this in Quit and reopen an app.
- The screen is slow but taps still register. Do a normal restart: hold the side button and either volume button until the slider appears (just the side button on iPhone SE), drag the slider, wait about 30 seconds, then hold the side button to turn it back on. You can also go to Settings > General > Shut Down.
- A button is broken but the screen works. AssistiveTouch, in Settings > Accessibility > Touch > AssistiveTouch, puts an on-screen menu on the display, and Apple lists restarting iPhone among the actions it can perform.
If the force restart doesn’t work
Work through these in order. Each one is more involved than the last.
1. Charge it, then try again
A phone that seems frozen on a black screen may simply have a flat battery. Apple’s advice is to plug it in for an hour and then repeat the force restart. If a low-battery picture appears instead, check the cable and charger, and leave it charging for 30 minutes or until it starts. Take off a thick case while you try the buttons again, since a stiff case can stop a press from registering.
2. Update iOS from a computer in recovery mode
If the phone sits on the Apple logo for several minutes with no progress bar, or keeps returning to a frozen screen, a computer can reinstall iOS. Choosing Update keeps your content; choosing Restore erases it. You need a Mac with current software (it uses Finder) or a Windows PC with the latest Apple Devices app, and a USB cable.
- Connect the iPhone to the computer with the cable.
- Open Finder on the Mac, or the Apple Devices app on the PC.
- With the cable still connected, press and quickly release volume up, press and quickly release volume down, then press and hold the side button. Keep holding past the Apple logo until you see the “Connect to computer” screen. (iPhone 7 uses side plus volume down held together; iPhone 6s and earlier use Home plus side or top.)
- On the computer, select your iPhone. When it offers Update or Restore, click Update.

- Wait while the computer downloads iOS. If the download takes more than 15 minutes, the iPhone may leave the recovery screen on its own; let the download finish, then repeat step 3.
Apple’s full procedure is in If you can’t update or restore your iPhone.
3. Restore, only if Update fails
Warning: a restore deletes everything on the iPhone. Anything not in an iCloud or computer backup is gone afterward, so read this before you click Restore. If you have a recent backup, you can put your data back during setup. The options for restoring, and how to bring back a backup afterward, are covered in restoring an iPhone with a computer or from a backup.
4. Get it checked
If recovery mode can’t update or restore the phone, or you can’t enter recovery mode because a button is broken or sticks, Apple says the phone likely needs service. The same goes for a phone that rings or vibrates while the display stays dark, which points to a screen problem rather than a software freeze.
How to tell it worked, and how to keep it from happening again
A successful force restart ends at the Lock Screen asking for your passcode. After you unlock, open a couple of apps and scroll; if touches register normally, you’re done. Nothing needs to be undone, because a force restart changes no settings.
If the freezes come back, look for a cause:
- Old software. Check Settings > General > Software Update and install anything waiting. If an update fails, the fixes in updating your iPhone to iOS 27 cover the usual blockers.
- Almost-full storage. Look at Settings > General > iPhone Storage. A phone with very little free space has less room to work, and freeing up storage on iPhone walks through what to clear first.
- One app every time. If the freeze always starts in the same app, update it from the App Store, or delete and reinstall it.
- Heat. A phone that has been in a hot car or in direct sun can slow down or stop responding until it cools to room temperature.
- A settings problem. As a step short of erasing, Settings > General > Transfer or Reset iPhone > Reset > Reset All Settings returns settings to their defaults without deleting data or media. You’ll need to rejoin Wi-Fi networks afterward. Don’t tap Erase All Content and Settings on that screen unless you mean to wipe the phone.

Common questions about a frozen iPhone screen
Will a force restart delete my photos or messages?
No. Your photos, messages, apps and settings stay on the phone. The only thing at risk is unsaved work in whatever app froze, such as a half-written note that hadn’t saved yet.
How long should I hold the side button?
Until the Apple logo appears, even if that takes 15 or 20 seconds. Letting go when the power-off slider appears is the most common mistake; the slider is not the end of the sequence.
Is the method different on an iPhone 11?
No, an iPhone 11 uses the same volume up, volume down, hold side sequence. If an iPhone 11 keeps locking up after that, the extra checks in restarting a frozen iPhone 11 are specific to that model.
The screen works but my touches land in the wrong place. Is that a freeze?
Not usually. Try a force restart once, remove any screen protector that is cracked or lifting, and clean the display. If touches are still misread, the display may need service.
Can I fix a frozen iPhone without a computer?
Usually, yes. The force restart and charging steps need nothing but the phone and a charger. A computer only comes in when the iPhone won’t get past the Apple logo or the “Connect to computer” screen.
What about software that claims to fix freezes without data loss?
Apple’s free recovery-mode Update already reinstalls iOS while keeping your data, so there is no need to install outside repair programs and give them access to your phone. Stick with Finder or the Apple Devices app.
Next step: once the phone is working, turn on iCloud Backup or back up to a computer, so a future restore never costs you anything.
You must be logged in to post a comment.