StandBy turns a locked, charging iPhone into a bedside clock, a photo frame or a small widget display you can read from across the room. To start it, open Settings, tap StandBy and make sure the switch is on. Then lock your iPhone, connect it to a charger, and set it down on its side so it sits still in landscape orientation. After a moment the Lock Screen gives way to a big clock or a pair of widgets.
These instructions follow iOS 27, the current iPhone software. StandBy first appeared in iOS 17, and the basics have stayed the same since then. Two differences are worth knowing: Apple’s instructions for iOS 26 included pressing the side button after placing the phone, and iPhone Duo uses folded positions instead of a charger, which has its own short section below.
What StandBy needs before it will appear
StandBy is picky about how the phone is sitting. Most “it doesn’t work” moments come from one of these conditions not being met, so check them first.
- The StandBy switch is on. It is on by default, but it can be turned off in Settings.
- The iPhone is locked. StandBy starts from the Lock Screen. If an app or the Home Screen is open, nothing happens.
- It is actually charging. A cable or a wireless charger both work. If the battery icon doesn’t show the charging bolt, StandBy won’t start.
- It is on its side and still. The phone needs to be in landscape orientation and resting at an angle, for example on a stand or leaning against a book. Lying flat on a table or standing upright in portrait does not count, and constant wobbling can keep it from starting.
A few terms come up in the steps below:
- View: one of the three StandBy screens (widgets, photos or clock). You swipe sideways between them.
- Widget stack: a column of widgets you flip through by swiping up or down. The widgets view has two stacks side by side.
- Smart Rotate: an option that lets a stack switch to the widget that seems most useful at the moment.
- Always-On display: a feature on supported iPhone models that keeps a dimmed screen visible while the phone is locked. It decides whether StandBy stays lit or goes dark.
Turn on StandBy and start it
- Open the Settings app.
- Tap StandBy. You’ll see a switch at the top of the screen.
- Make sure the StandBy switch is on (green). Leave Settings.

- Lock your iPhone by pressing the side button, so the Lock Screen is showing.
- Connect your iPhone to a charger. You can use a charging cable or set it on a MagSafe or other wireless charger.
- Turn the phone on its side and rest it on a stand or prop it against something, keeping it still.
- Wait a few seconds. The first time, a welcome screen may appear; dismiss it. You should then see a large clock or two widgets filling the screen.
If you ever want to start or stop it by voice, Apple notes that you can ask Siri to turn StandBy on or off.
Switch between widgets, photos and the clock
StandBy has three views lined up side by side. Swipe left or right anywhere on the screen to move between them, and swipe up or down to change what that view shows.

- Widgets: two widget stacks, one on the left and one on the right. Swipe up or down on either side to flip through that stack on its own. Many widgets are interactive, so you can check off a reminder or start a podcast without unlocking.
- Photos: a slow slideshow from your photo library. Swipe up or down to move between collections such as featured photos, nature, pets or people, depending on what your library contains. Your iPhone may ask you to unlock before it shows your pictures, which keeps them private if someone else glances at your phone.
- Clock: one large clock. Swipe up or down to try the different styles, including digital, analog, world and more playful designs. Several styles also show the next alarm or the temperature.
Your iPhone remembers the last view you picked, so you don’t have to choose it again every night.
Customize the widget stacks
Both stacks in the widgets view can be edited, just like a stack on your Home Screen. You need to be in StandBy to do this; there is no StandBy widget editor in Settings. The layout of the editing screen can look slightly different between releases, but it works along these lines:
- Go to the widgets view in StandBy.
- Touch and hold the left or right stack. Your iPhone asks you to unlock with Face ID, Touch ID or your passcode.
- When the stack wiggles in the center of the screen, tap the Add button (the plus sign) to pick a new widget, then tap Add Widget.
- To take a widget out, tap the Remove button (the minus sign) on it.
- To change the order, touch and hold a widget and drag it up or down.
- Turn Smart Rotate or Widget Suggestions on or off with the buttons beside the stack. Turn Smart Rotate off if you want a stack to stay on the widget you chose.
- Tap Done or tap an empty area, then repeat for the other stack if you like.
Only widgets from apps that support StandBy show up in the list. If you want a deeper look at how stacks, sizes and widget options work elsewhere on the phone, this walkthrough on editing and stacking iPhone widgets covers the Home Screen side. Apple’s page on adding, editing and removing widgets also confirms that StandBy widgets respond to taps.
Pick which photos appear
In the photos view, touch and hold the screen and unlock when asked. From there you can add one of your own albums with the Add button, remove an album with the Remove button, and you may be able to hide a collection you don’t want on display. Tap Done when you’re finished. A shared family album is a good choice for a kitchen counter, while a single “Favorites” album keeps surprises off a desk at work.
Change the clock style and color
In the clock view, swipe up or down to pick a style. To change its color, touch and hold the clock, unlock if asked, then tap the small round color button in the corner and choose a shade. Most styles can be recolored. Tap Done to keep the change.
Night Mode, notifications and when the screen turns off
All of StandBy’s settings live in one place: open Settings and tap StandBy. In iOS 27 you’ll find these options:

- StandBy: the main switch for the whole feature.
- Night Mode: in a dark room, the screen dims and everything turns a deep red so it doesn’t light up the bedroom. Turn it off if you’d rather see normal colors at night. If you don’t see Night Mode here, check inside Display.
- Show Notifications: lets incoming notifications appear on the StandBy screen. Turn it off if the phone sits where other people can see it.
- Show Preview on Tap Only: shows that a notification arrived but hides the message text until you tap it. This is a good middle ground on a shared desk.
- Display: controls when the screen turns off. Choose Automatically (the screen turns off when the phone isn’t in use and the room is dark), After 20 Seconds, or Never (stays on as long as StandBy is running). If you don’t see Display, your model doesn’t offer this choice and the screen sleeps on its own.
Apple describes these choices on its StandBy page in the iPhone User Guide, which is worth checking if a label on your screen doesn’t match.
How the Always-On display changes StandBy
On iPhone models with an Always-On display, StandBy can stay visible the whole time the phone is charging, which makes it work like a real bedside clock. To see if your iPhone has this, open Settings, tap Display & Brightness and look for an Always On Display switch. If it’s missing, your model doesn’t have the feature.
On every other iPhone, the StandBy screen goes dark after a short while. That’s normal. To bring it back, tap the screen, gently nudge the table or stand the phone is on, or use Siri.
Even on supported models, Apple lists times when the Always-On display switches itself off, and those affect StandBy too:
- Low Power Mode is on.
- A Sleep Focus is on, or it’s your usual bedtime.
- The phone is face down or covered.
- You’ve walked away wearing a paired Apple Watch.
Setting Display to Never keeps the screen lit the whole time, which uses more power than letting it sleep. If you’re comparing this with the regular screen timeout, the guide on keeping the iPhone screen on longer explains Auto-Lock, which is a separate setting. Apple’s page on keeping the display on longer lists the Always-On exceptions in full.
Give each charger its own view
If you charge with MagSafe in more than one place, StandBy remembers which view you used on each charger. Alex, for example, keeps the clock on the nightstand charger and a photo slideshow on the kitchen charger. Once each spot is set, the phone shows the right view when it snaps on, with no swiping needed.
Using StandBy on iPhone Duo
iPhone Duo starts StandBy differently. You don’t need a charger: from the Lock Screen, partly fold the phone like a book or like a tent and set it down. Instead of the three fixed views, iPhone Duo uses StandBy faces that you can add, customize and delete. Tap the current face, then swipe to pick another, or touch and hold a face and tap Customize to change its style, color, widgets, photos or clock position.
In Settings > StandBy, iPhone Duo also lets you choose which folded positions start StandBy and turn on Only While Charging if you want it to behave like other iPhone models.
When StandBy won’t start or keeps going dark
Work through these in order. Most problems clear up at the first or second item.
- Check the switch. Open Settings > StandBy and confirm StandBy is on.
- Confirm it’s charging. Look for the charging bolt on the battery icon. Reseat the cable, or center the phone on a wireless charger. A dirty charging port can stop a cable from connecting.
- Fix the angle. Turn the phone fully sideways and lean it up. Flat on a table or upright in portrait won’t trigger StandBy.
- Lock the phone. Press the side button so the Lock Screen is showing, then wait a few seconds without touching it.
- Check Low Power Mode. If the screen keeps going dark on a model with Always-On display, open Settings > Battery and turn off Low Power Mode, then look at Settings > StandBy > Display and choose Never or Automatically.
- Remember your model. If your iPhone has no Always-On Display switch, StandBy is designed to sleep. A tap or a nudge wakes it.
- Unlock first if Face ID struggles sideways. Some older models can’t use Face ID in landscape. Enter your passcode when asked, or unlock before you set the phone down, to edit widgets or see photos.
- Restart if it still won’t appear. Turn the iPhone off and on again, then repeat the steps above.
Two other things that look like faults are actually settings. A red screen at night is Night Mode doing its job. And if the screen lights up when you move in the dark, look in Settings > StandBy > Display for a Motion to Wake switch and turn it off if your version shows one.
Check that it worked, and how to leave StandBy
You’ll know StandBy is running when the normal Lock Screen is replaced by a full-width clock, photo or pair of widgets, and swiping sideways moves between them. To leave StandBy for the moment, pick the phone up and turn it upright, or unplug it. It comes back the next time you set it down charging on its side.
To turn StandBy off completely, open Settings, tap StandBy and turn off the StandBy switch. Your custom widgets and clock choices are kept, so turning it back on later picks up where you left off.
Quick answers about StandBy
Does StandBy work without a charger?
On most iPhone models, no. Charging is one of the triggers. iPhone Duo is the exception, because it starts StandBy from a folded position and only needs a charger if you turn on Only While Charging.
Will people nearby see my messages?
They can, because notifications appear large in StandBy. Turn on Show Preview on Tap Only to hide the text, or turn off Show Notifications entirely. A Focus such as Do Not Disturb also cuts down what comes through.
Can I see music controls or a delivery tracker?
Yes. Apple describes StandBy as a way to view Live Activities in full screen. When one is running, you can usually open it full screen from StandBy.
Do alarms still go off in StandBy?
Yes. Alarms work as usual, and many clock styles show your next alarm so you can check it without picking the phone up. When it rings, you can snooze or stop it as usual.
Does StandBy drain the battery?
The phone is charging the whole time, so the battery still fills up. A screen that stays on (Display set to Never) uses more power than one that sleeps, so choose Automatically if you’d like the screen to rest while you’re asleep.
Next step
Once StandBy is your bedside clock, it’s worth making sure the alarm behind it is set the way you want. This guide on setting an alarm in the Clock app covers repeating alarms, labels and sounds.
You must be logged in to post a comment.